Sealife DC100 User Manual download pdf (Page 54)

Special Problems with Digital Cameras (First check under “All Cameras” section).

Problem: No power

. Camera shuts down immediately after you turn the power on.

Reason: Batteries are empty. Solutions: Use only NiMH batteries with a capacity of 1800

mAh or more, we recommend SeaLife Batteries. Batteries must be freshly and fully

charged on the day that you take pictures. Do not mix different batteries in the camera or

in the charger. Charging takes about 2 1/2 hours, but you might leave the batteries in the

charger overnight. Avoid using the monitor on land, it consumes most of the power. Avoid

reviewing your pictures while taking pictures. Full batteries have a charge of 1.39 to 1.42

V, empty batteries less than 1.22V.

Problem: Message “No memory”.

Reason: Either the capacity of your built-in memory or

flash card is used up, or your flash card is defective. Solutions: First download and save

important pictures to your computer. Then you might try to reformat the flash card, which

deletes all pictures or delete pictures from the built-in memory. If problem persists, use a

different flash card. Use a SeaLife flash card or another reputable brand. See the website

www.sealife-cameras.com for tested and recommended flash cards.

Problem: Pictures have disappeared on the flash card.

See above solution.

Problem: Message “Removable Disk F:” does not show up on “My Computer” when

downloading. Reason: Either the cable connection has not been done correctly or you just

have to wait longer (up to 4 minutes on some computers). Solution: Follow the sequence:

Computer on, camera on, set camera on PC, connect cable to camera, then to computer.

Problem: Pictures don’t appear on TV

. Reasons: Wrong connection, wrong TV system

setting, TV not on video channel, camera power not on. Solutions: Plug video cable into

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

No comments

Sealife DC100 User Manual Page 54