Sealife SL962 Instruction Manual download pdf (Page 35)

XII. Troubleshooting Guide

1. Digital Pro Flash does not fire when switch is turned from

“ON” to “TEST.”

a. Wait until the red flash-ready light is on. If ready light

does not turn on, check batteries are inserted correctly.

b. Test or replace batteries, if necessary. If 1 of the 4 batteries

is not charged or damaged, the read-light may turn on,

but the flash won't. Replace all 4 batteries.

c. If above does not correct the problem, contact your local

SeaLife dealer or SeaLife Service Center in your country.

For a list of dealers, please visit www.sealife-cameras.com.

2. Digital Pro Flash fires as tested above, but does not fire when

triggered by camera.

a. Make sure the power switch is set to “ON” position and

the red flash-ready light is on.

b. Take a test pictures and make sure your camera’s inner

flash fires.

c. Check that your camera settings are correct.

i. For SeaLife digital cameras, set to External Flash

mode. Make sure camera’s ready-light is on.

ii. For other camera brands, set camera to Flash ON.

Make sure the camera’s flash setting is not set to

Auto or Red-Eye reduction. Refer to your camera

instructions for problems related to the camera.

d. Make sure the flash pre-flash setting switch is properly set in

accordance with the instructions provided in this manual.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

No comments

Sealife SL962 Instruction Manual Page 35